SKU: RG-AP530-I V2
Category: ruijie access points
Availability: Unlimited
Brand: Ruijie
Model Number: RG-AP530-I V2
Availability: In stock
Minimum order quantity: 1
Maximum order quantity: 999
Listed date: 05/08/2024
Model | RG-AP530-I V2 | ||
Radio | Concurrent dual-radio dual-band | ||
Protocol | 802.11a/b/g/n/ac | ||
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz | ||
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) | |||
Antenna | Built-in Antenna | ||
3×3 MIMO | |||
Spatial Streams | 3 | ||
Max Throughput | 1750Mbps | ||
Modulation | OFDM: BPSK@6/9Mbps | ||
QPSK@12/18Mbps | |||
16-QAM@24Mbps | |||
64-QAM@48/54Mbps | |||
DSSS: | |||
DBPSK@1Mbps | |||
DQPSK@2Mbps | |||
[email protected]/11Mbps | |||
MIMO-OFDM: | |||
BPSK, QPSK, 16QAM, 64QAM and 256QAM | |||
Receiver Sensitivity | 11b: -93dBm(1Mbps), -89dBm(5Mbps), -87dBm(11Mbps) | ||
11a/g: -89dBm(6Mbps), -82dBm(24Mbps), -78dBm(36Mbps), -72dBm(54Mbps) | |||
11n: -85dBm@MCS0, -67dBm@MCS7, -83dBm@MCS8, -65dBm@ MCS15 | |||
11ac HT20: -85dBm (MCS0) , -60dBm (MCS9) | |||
11ac HT40: -82dBm (MCS0), -60dBm (MCS9) | |||
11ac HT80: -79dBm (MCS0) , -54dBm (MCS9) | |||
Transmit Power | 100mw | ||
Adjustable Power | 1dBm | ||
Service Port | 2 10/100/1000BASE-T Ethernet ports | ||
Management Port | 1 console port | ||
LED Indicators | 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) | ||
IP Rating | IP41 | ||
Safety Standard | GB4943, EN/IEC 60950-1 | ||
EMC Standard | GB9254, EN301 489 | ||
Health Standard | EN 62311 | ||
Radio Standard | EN300 328, EN301 893 | ||
Bluetooth | BT4.0 (BLE) | N/A | |
iBeacon | |||
WLAN | Maximum clients per AP | Up to 256 | |
BSSID capacity | Up to 16 per radio Up to 32 per AP | ||
SSID hiding | Support | ||
Remote Intelligent Perception Technology (RIPT) | Support | ||
X-speed | Support | ||
STA control | SSID/radio-based | ||
Bandwidth control | STA/SSID/AP-based speed control | ||
Preference for 5GHz (band select) | Support | ||
Security | PSK, Web, and 802.1x authentication | Support | |
Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) | ||
QR code authentication | Support | ||
SMS authentication | Support | ||
PEAP authentication | Support | ||
Data frame filtering | Whitelist, static/dynamic blacklist | ||
User isolation | Support | ||
Rogue AP detection and countermeasure | Support | ||
Dynamic ACL assignment | Support | ||
WAPI | Support | ||
RADIUS | Support | ||
CPU Protection Policy (CPP) | Support | ||
Network Foundation Protection Policy (NFPP) | Support | ||
L2 Features | IGMP snooping | Support | |
VLAN features | Support | ||
Routing | IPv4 address | Static IP address | |
IPv6 CAPWAP tunnel | Support | ||
ICMPv6 | Support | ||
IPv6 address | Manual or automatic configuration | ||
Multicast | Multicast to unicast conversion | ||
Location-based Service | Wireless position tracking | Support | |
Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and web management | |
Real-time spectrum analysis | Support | ||
(need to integrate with SNC) | |||
Fault detection and alarm | Support | ||
Statistics and logs | Support | ||
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. | ||
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. | |||
Dimensions (W x D x H) (mm) | 205 × 205 × 42 | ||
Weight | 0.7kg | ||
Installation Mode | Ceiling/wall-mountable | ||
Power Supply | Local power supply and PoE (802.3af) | ||
Power Consumption | <12.95W | ||
Temperature | Operating Temperature: -10°C to 50°C | ||
Storage Temperature: -40°C to 70°C | |||
Humidity | Operating Humidity: 5% to 95% (non-condensing) | ||
Storage Humidity: 5% to 95% (non-condensing) |
No review found.
Free Shipping on Flat Rate starts from order amount KD 0.000
Easy Return, Quick Refund. See more.